Question:
How do I connect to the Acquire Lite Player?
Resolution:
It is very simple to connect to the Acquire Lite Player, firstly you must ensure it is currently connected to the same network (either Wired or Wireless) as the PC you are logging in to it from - much in the same way you would access a Wireless Router.
When the Acquire Lite Player is loaded up and no project has been deployed it will play the default project, as shown below:
On these screens, you will notice there will be an IP Address displayed, simply use this IP Address and enter it in to an Internet browser page, such as Internet Explorer or Google Chrome on the PC you are using to create a project.
If you have entered this correctly you will now be able to login.
Please note: if you get a message telling you This page can’t be displayed then please check the IP Address is correct, you are connected to the Internet or there is no Firewall restrictions.
Comments
0 comments
Article is closed for comments.